Lenze SIMPLABELT Compact Units - Manual (Page 9)

Preface and general information
9
l
BA S’belt KE EN 1.0
1.3 Lenze-drive systems
1.3.1 Labelling
l Lenze drive systems are uniquely designated by the content of their nameplates.
l Manufacturer:
Lenze GmbH & Co KG
Postfach 10 13 52
D-31763 Hameln
1.3.2 Application as directed
l Lenze drive systems
– are intended for use in machinery and systems
– must only be used for the purposes ordered and confirmed
– must only be operated under the ambient conditions prescribed in these operating
instructions
– must not be operated beyond their corresponding power limits
Any other use shall be deemed inappropriate!
1.3.3 Legal regulations
Liability
l The information, data, and notes in the Operating Instructions were on the state of the art at
the time of printing. Claims about drive systems already supplied cannot be made from the
information, illustrations, and descriptions.
l We do not accept any liability for damages and operating interference caused by:
– inappropriate use
– unauthorized modifications to the drive system
– improper working on and with the drive system
– operating mistakes
– disregarding the Operating Instructions
Warranty
l Conditions of warranty: see terms of sale and delivery of Lenze Drive Systems GmbH.
l Warranty claims must be made to Lenze immediately after detecting the deficiency or fault.
l The warranty is void where liability claims cannot be also made either.
Show/Hide Bookmarks