3 mechanical installation, Mechanical installation – Lenze EMF2113IB User Manual
Page 47
Advertising
![background image](/manuals/565915/47/background.png)
Mechanical installation
3
EDKMF2113 DE/EN/FR 5.1
47
l
H1_MechINS−MechInst
3
Mechanical installation
2102LEC014
Fig. 1
Attaching the communication module
ƒ Plug the communication module onto the standard device (here: 8200 vector).
ƒ Tighten the communication module to the standard device using the fixing screw in
order to ensure a good PE connection.
)
Note!
For the internal supply of the communication module by the 8200 vector
frequency inverter the jumper has to be adjusted within the interface opening
(see illustration above).
Observe the notes (
^ 51).
Advertising