Lenze MC Series Drives - Manual (Page 19)

15 RG-MCMOD
Drive Control & Communication
5.4.2 Operational Status - Registers #24 & 26
Table 11 lists the Operational Status (byte D3L)
Table 11: Operational Status - Register #26
Setting Parameter
0 FAULT LOCKOUT
1 FAULT
2 START PENDING
3 STOP
4 DC BRAKE
5 RUN AT 0Hz
6 RUN
7 ACCEL
8 DECEL
9 CURRENT LIMIT
10 DECEL OVERRIDE
11 LOWER TRANSISTORS SWITCHING ON
12 SLEEP
5.4.3 Actual Rotational Direction - Registers #24 & 27
Table 12 lists the Actual Rotational Direction (Register #24 byte D4H or Register #27 DH).
Table 12: Actual Rotational Direction
Setting Direction
0 FORWARD
1 REVERSE
5.4.4 Control Mode - Registers #24 & 27
Table 13 lists the Control Mode (Register #24 byte D4L or Register #27 DL).
Table 13: Control Mode
Setting Control Operation
0 LOCAL Start/Stop operation controlled from drive's keypad
1 REMOTE Start/Stop operation controlled from the drive's terminal strip
2 SERIAL Start/Stop operation controlled via serial link