About these instructions – Lenze MC Series Drives User Manual
Page 2
This documentation applies to the use of an MC 1000 Series and an MC 3000 Series Variable Frequency Drive
in a Modbus Network and should be used in conjunction with the MC Series Installation and Operation Manual
(Document M101 or M301, respectively) that shipped with the drive. These documents should be read in their
entirety as they contain important technical data and describe the installation and operation of the drive.
© 2003 Lenze AC Tech Corporation
No part of this documentation may be copied or made available to third parties without the explicit written approval
of Lenze AC Tech Corporation. All information given in this documentation has been carefully selected and tested
for compliance with the hardware and software described. Nevertheless, discrepancies cannot be ruled out. Lenze
AC Tech does not accept any responsibility nor liability for damages that may occur. Any necessary corrections will
be implemented in subsequent editions.
About These Instructions