Lenze MC−xxx Card - Manual (Page 12)

Product description
Variants
MC−ETC, MC−ETH
3
l
12 BA_MC−Card EN 1.0
3.3.3 MC−ETC, MC−ETH
Application as directed
The MC−ETH is a plug−in card for connecting a Lenze device to a Ethernet network.
The MC−ETC is a plug−in card for connecting a Lenze device as master to a EtherCAT
network.
The MC card is used as directed if it is solely used in lenze device with MC card interface. A
different use, or one beyond these purposes, is not permissible.
)
Note!
This is a device of class A. It can cause radio interference in residential areas. In
this case, the operator may have to take special measures. Any costs arising
from these measures must be paid by the operator.
Elements
0
1
3
2
SPEED
LINK
LAN
MC-ET
H
RJSS-5381
4
MC−ETH−001
Pos. Description
0 Front panel
1 Printed circuit board
2 Coding
3 Standard device connection
4 Network connection