Lenze MC−xxx Card - Manual (Page 32)

Electrical installation
Wiring and Configuration
MC−ISI
4
l
32 BA_MC−Card EN 1.0
Use of the MC card in Windows
â
XP or Windows
â
Embedded Standard 2009
In order to use the communication card in Windows
â
XP, a device driver is required.
Usually, the communication card in the IPC is already mounted and the driver is installed
and configured. Thus, an installation is only required if the communication card has been
ordered separately or the system is to be set up anew.
The device driver can be found on the "PC based Automation" DVD or on the Internet at
www.Lenze.com in the download area.
)
Note!
The communication card is configured via jumper and DIP switch. The driver
cannot be used for this purpose.
)
Note!
Addressing the communication card from your own applications requires
special programming skills. Lenze does not offer any support regarding this
matter. However, we can refer you to service providers who execute
customised programming and are familiar with Lenze Industrial PCs.
Use of the MC card in Windows
â
CE
In Windows
â
CE the card interact via control system. All required drivers are installed
)
Note!
No special support is provided currently if you use the communication card in
your own applications. For special projects, please contact your sales office.