Lenze MC−xxx Card - Manual (Page 8)

Product description
Scope of supply
3
l
8 BA_MC−Card EN 1.0
3 Product description
3.1 Scope of supply
Numbe
r
Name
1 MC card
1 Mounting Instructions
)
Note!
After receipt of the delivery, check immediately whether the items match the
accompanying papers. We do not accept any liability for deficiencies claimed
subsequently.
Claim
ƒ visible transport damage immediately to the forwarder
ƒ visible deficiencies/incompleteness immediately to your Lenze
representative.
3.2 Identification
Type code MC − xxx − xx
Module Card
CAN2 = dual CAN controller
ETC = EtherCAT controller
ETH = Ethernet controller
ISI = serial interfaces
PBM = PROFIBUS master
PBS = PROFIBUS slave
PNC = PROFINET controller
PND = PROFINET device
Version