Lenze Tmd Series Drives Modbus Communications - Manual (Page 18)

RG-TDMOD 14
Drive Control & Communication
NOTE 1 - Drive Control
• During each write to Register #1 only one bit should be set in the drive control word.
• If more than 1 bit is set, the drive responds to stop bit only.
• If stop bit is not set, but more than 1 bit is set, drive responds with exception 04.
NOTE 2 - Drive Family
• The QC and DL Series drives return 64 (40H)
• The MC Series drives return 65 (41H)
• The SC Series drives return 66 (42H)
• The MCH Series drives return 68 (44H)
• The
smd Series drives return 69 (45H)
• The TC Series drives return 70 (46H)
• The
Tmd Series drives return 71 (47H)
• The SMV Series drives return 72 (48H)
5.3 Drive Size - Register #21
Table 9 lists the Tmd Series drives. Register 21 will contain the value in the "Size" column.
Table 9: Drive Size - Register #21
Size kW Voltage Size kW Voltage
00 0.55
1/N/PE or 3/PE
230V
28 0.55
3/PE
400/480V
01 0.37 29 0.37
02 0.75 30 0.75
03 1.1 31 1.1
04 1.5 32 1.5
05 2.2 33 2.2
16 0.75
3/PE
230V
34 4.0
17 1.1 35 5.5
18 1.5 36 7.5
19 2.2 44 3.0
20 4.0
21 5.5
22 7.5