About these instructions – Lenze SCF Series Drives Modbus Communications User Manual
Page 2
This documentation applies to the use of an SCF Series Variable Frequency Drive in a Modbus Network and should
be used in conjunction with the SCF Series Installation and Operation Manual (Document SF01) that shipped with
the drive. These documents should be read in their entirety as they contain important technical data and describe
the installation and operation of the drive.
© 2003 Lenze AC Tech Corporation
No part of this documentation may be copied or made available to third parties without the explicit written approval
of Lenze AC Tech Corporation. All information given in this documentation has been carefully selected and tested
for compliance with the hardware and software described. Nevertheless, discrepancies cannot be ruled out. Lenze
AC Tech does not accept any responsibility nor liability for damages that may occur. Any necessary corrections will
be implemented in subsequent editions.
About These Instructions