Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 199)

L-force | PLC Designer
The Individual Components

DMS 3.2 EN 02/2011 TD29 197
Login
This command will open the dialog 'Login' where you can enter the access data for the
ENI data base via the ENI Server. The access data also have to be defined in the ENI
Server (ENI Admin, User Management) and – depending on the currently used data
base – also in the user management of the data base. After the command has been
executed, first the Login dialog for category 'Project objects' will open.
Dialog 'Login'
The following items are displayed:
• Data base: project objects
• Host: address of the computer where the ENI Server is running (must match with
the entry in field 'TCP/IP address' in the project options dialog for 'Project source
control').
• Project: Name of the data base project (must match with the entry in field 'Project
name' in the project options dialog for 'Project source control'/category 'Project
Objects').