Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 767)

L-force | PLC Designer
PLC Designer Visualization

DMS 3.2 EN 02/2011 TD29 765
Command The equivalent in the
programming version
of »PLC Designer« Explanation
READRECEIPT <name
of watch list>
'Read receipt' In the defined watch list the pre-
definition of the variables will be
replaced by the current values.
Regard: The watch list must be
defined before via
DEFINERECEIPT and a delay of
500 ms must be inserted ( see
above: command DELAY) !
WRITERECEIPT <name
of watch list>
'Write receipts' The name of a watch list of the
receipt manager is expected. The
receipt of this watch list will be
written. A previous execution of
DEFINERECEIPT is not necessary.
SAVEWATCH 'Save watch list' The receipt will be read into the
current watch list which will be
stored in a file.
Important: call a previous
DEFINERECEIPT to define the
current receipt and insert a delay
of 500 ms (see above: command
DELAY) !
LOADWATCH 'Load watch list'+ 'Write receipt' The standard window ‚File open'
appears, from which a previously
stored receipt can be selected.
This receipt will be immediately
written into the controller
system.
CHANGEUSERLEVEL - A dialog for setting the user
group level will open. The eight
PLC Designer user group levels
are offered for selection.
CHANGEPASSWORD cp. 'Project' 'User Group
Passwords...' A dialog for changing the user
group password will appear.
SAVEPROJECT 1)2) 'File' 'Save' The project will be saved.
EXITPROGRAM 1)2) 'File' 'Close' The program will be exited.
PRINT 1)2) 'File' 'Print' The current visualization will be
printed out online.
HELP <name of help file> 1)2) Call of a help file Depending on which language is
set for the visualization, a help
file will be called which is entered
for that language in the PLC
Designer ini-file. (see 'Extras'
'settings')