Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 355)

L-force | PLC Designer
The Resources

DMS 3.2 EN 02/2011 TD29 353
You can select Yes or No. If you close the dialog with Yes, the configuration editor will
be closed also. Reopen it and you will see the configuration in the new format.

Stop!
Be aware that after having converted the old format cannot get restored anymore!
Custom specific parameter dialog
The parameterizing possibilities of the configurator can be expanded by the use of an
application-specific DLL, that is an individual dialog. This 'Hook'-DLL must be in that
directory which contains the configuration file and then can be linked by an entry in
the configuration file.to a module or channel. If done so, for the concerned modules
the standard dialog 'Modulparameter' will be replaced by a dialog defined in the DLL.
Example of an application-specific parameter dialog (Custom Parameters)