Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 728)

L-force | PLC Designer
PLC Designer Visualization
726 DMS 3.2 EN 02/2011 TD29

Category Columns:
Dialog for the configuration of a Table, Category Columns
Here you define the table elements. In the left window you get al list of all elements,
which are handled in the array per index. In case of an array of a structure these would
be the structure components.
Using the arrow button > you can transfer a selected component from the left
window to the right window where you define the set of elements to be displayed in
the table. Pressing button >> all elements will be transferred at a single blow. In the
same manner you can remove elements from an already defined set (<, <<). In order to
modify the default settings concerning the display of the table column for one of the
elements, perform a double-click on the desired entry in the right part of the window,
or press button '...' to open the dialog 'Configure columns':
Dialog for Configuring a Table, Category Columns, Column Properties