Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 735)

L-force | PLC Designer
PLC Designer Visualization

DMS 3.2 EN 02/2011 TD29 733
20.6.20 ActiveX-Element
The ActiveX-Element serves for displaying a passive ActiveX Control within a
visualization. The element is usable on Windows32 based systems in PLC Designer
HMI and in the »PLC Designer« Target-Visualization.
The configuration dialog is opened by a double-click on the inserted element and
offers three sub-dialogs, for selecting the control type, for defining method calls and
for the configuration of the display:
1. Control:
Dialog Configure ActiveX-Element, Category Control
In this dialog you can mark the desired ActiveX Control in the selection list offering all
ActiveX Controls which are registered on your computer.