Assembly instructions – Marshalltown SW100H Shockwave Vibratory Screed User Manual
Page 4
4 of 48
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.marshalltown.com
WS570
R10-22-12
ASSEMBLY INSTRUCTIONS
Your Shockwave™ Screed power unit ships in two boxes, one containing the
handle bars and the other containing the power unit . Assembly is easy,
following these steps:
INSTALLING HANDLE BARS AND KICKSTAND:
Step 1 –
Remove the 4 hex screws (A) that hold down the two
handle mounting blocks
.
Step 2 – Slide kickstand arm onto kickstand end and fasten
with nut & bolt (B) as shown
Step 4 – Making sure all mounting block and frame holes are
aligned, insert hex screws and tighten with 7/16" wrench or
socket .
Step 3 – Place handle bars into mounting blocks, making sure
handle bars are centered evenly across the mounting blocks .
A
B