Mk-370 saw operation – MK Diamond MK-370 User Manual
Page 19
Advertising
19
MK-370 SAW OPERATION
ADJUSTMENT & OPERATION
DO NOT FORCE THE TOOL. It will do the job better and safer at the rate for
which it was designed.
CAUTION
(A)
Loosen the retaining thumbscrew
and place the Atdjustable Cutting
Guide to the desired cut length
and tighten thumbscrew
(B)
Place the tile against the
Ruler/Stop and Cutting
Guide
(C)
Turn the motor ON and verify
proper cooling flow on both sides
of the blade (See Maintenance
Section to increase/decrease flow)
(D)
Perform the cut. Turn the motor
OFF when work is complete
Advertising