MK Diamond MK-370 - Manual (Page 23)

23
MK-370 SAW MAINTENANCE
MOTOR BRUSH CHANGE-OUT
Disconnect the tool before servicing and when changing accessories, such as
blades and bits.
WARNING
(A)
Locate and loosen one Motor
Brush Housing Cover using a Flat
Head Screwdriver
(B)
Remove the Motor Brush
Housing Cover
(C)
Remove the old Motor Brush
(D)
Clean the Motor Brush Housing
using a Q-tip
(E)
Align and install the new Motor
Brush
(F)
Install Motor Brush Cap and
tighten using a screwdriver
(G)
Install the second Motor Brush
(Repeat Steps C to F)