MK Diamond MK-1280 Gas - Manual (Page 14)

14
MK-1280 GAS SAW ASSEMBLY
MOVABLE CUTTING TABLE INSTALLATION
Fig. A
While holding the front, position
movable Cutting Table roller
wheels above Guide Rails
Fig. B
Seat movable Cutting Table
roller wheels on saw Guide Rails
Fig. C
Verify movable Cutting Table
is seated correctly by moving
table back and forth
ADJUSTABLE CUTTING GUIDE INSTALLATION
Fig. A
Loosen adjustable Cutting
Guide retaining thumbscrews
by turning counter-clockwise
Fig. B
Seat and tighten the adjustable
Cutting Guide retaining
thumbscrew
The adjustable Cutting Guide can be used on either side of the Diamond Blade. NOTE: