MK Diamond MK-1280 Gas - Manual (Page 31)

31
MK-1280 GAS SAW CART ASSEMBLY
Fig. A
Place handle in the middle of tow
bracket. Slide one washer on to
bolt and slide through hole
Fig. B
Place washer and Nylok nut on
end of bolt and tighten
Fig. A
Place cart upside down on a
flat surface
Fig. D
Place stationary casters on rear
bolts with brake facing out. Place
one flat washer, one lock washer and
a nut on each bolt. Tighten each nut
to secure caster. Turn cart upright
Fig. B
Place one flat washer on each of
the 16 bolts
Fig. C
Place swivel casters on front bolts,
followed by one flat washer, one
lock washer and a nut. Tighten
each nut to secure caster
CART ASSEMBLY (OPTIONAL ACCESSORY)
HANDLE ASSEMBLY
Rear
Front