MK Diamond MK-1280 Gas - Manual (Page 15)

15
MK-1280 GAS SAW ASSEMBLY
DIAMOND BLADE INSTALLATION
Fig. A
Loosen Blade Guard Bolts
Fig. D
Install retaining screw and
outer flange
Fig. F
Install Blade Guard and
tighten bolts
Fig. B
Remove the Blade Guard.
Remove retaining screw, (left-
hand thread) and Outer Flange
Fig. E
Tighten retaining screw and
Outer Flange. Reverse process
to install
Fig. C
Install Diamond Blade onto
Blade Shaft
When installing the diamond blade retaining-bolt, ensure the threads of the bolt are aligned
with the threads of the blade shaft so as not to “cross-thread” the bolt.
NOTE: