MK Diamond MK-1280 Electric - Manual (Page 11)

11
The MK-1280 Electric Saw is designed for use with a 16-inch diameter segmented wet or dry MK Dia-
mond blade with a .110 to .375 inch cutting width.
The MK-1280 Electric Saw can cut a variety of masonry types including, cinder block, slump stone
block, wall brick, paver brick, concrete block and cylinders, roofing tile, marble, granite, decorative
rock or almost any other non-ferrous material.
NOTE: The MK-1280 Electric Saw is not designed to cut plastic or metals.
Engine power ratings are calculated by the individual engine manufacturer and the rating method may
vary among engine manufacturers. Users are advised to consult the engine manufacturer’s owners
manual and website for specific information regarding engine power rating and maintenance.
PRODUCT SPECIFICATIONS
Operated and used according to this manual, the MK-1280 Electric Saws will provide years of
dependable service.
The MK-1280 Electric Saw is engineered as portable brick saw powered by a Baldor 2 Hp motor. The
saw is capable of cutting masonry up to five (5.75) inches (127 mm) in height, and twenty-eight (28)
inches (711 mm) in length in a single pass.
Motor specifications for the MK-1280 Series Saw are listed below.
Motor/Engine Baldor
Power 2 Hp 120V/230V
Blade Capacity 16” (406mm)
Depth of Cut 5.75” (146mm)
Length of Cut 13.5” (2” Thick Brick)
L x W x H
(inches)
L x W x H (mm)
48.5” x 20.5” x 28”
1,232 x 521 x 711
Weight 185 lbs (84 kg)
Part # 167492
GENERAL DESCRIPTION
SPECIFICATIONS
BLADE CAPACITY
MASONRY TYPES
MK-1280 ELECTRIC SAW PRODUCT SPECIFICATIONS
MOTOR SPECIFICATIONS