MK Diamond MK-1280 Electric User Manual
Page 17
Advertising
17
MK-1280 ELECTRIC SAW
ASSEMBLY
DIAMOND BLADE INSTALLATION
Fig. A
Loosen Blade Guard Bolts
Fig. D
Install Retaining Screw and
Outer Flange
Fig. F
Install Blade Guard and
tighten bolts
Fig. B
Remove the Blade Guard.
Remove Retaining Screw, (left-
hand threads) and Outer Flange
Fig. E
Tighten retaining screw and
Outer Flange. Reverse process
to install
Fig. C
Install Diamond Blade onto
Blade Shaft
When installing the diamond blade retaining-bolt, ensure the threads of the bolt are aligned
with the threads of the blade shaft so as not to “cross-thread” the bolt.
NOTE:
Advertising
This manual is related to the following products: