MK Diamond MK-1280 Electric - Manual (Page 18)

18
MK-1280 ELECTRIC SAW INSPECTION
The pre-start inspection should be performed before beginning any job.
If the Diamond Blade shows signs of fatigue cracking, replace the blade before
starting work.
Fig. C
Verify Movable Cutting Table
moves freely and inspect
engine
Fig. B
Inspect Wooden Strip for
excessive grooves
Fig. A
Inspect Blade for damage –
Verify Blade correct for mate-
rial being cut
PRE-START INSPECTION
CAUTION
Fig. B
Open Cooling flow control
valve to adjust flow
Fig. A
Attach Hose
WET CUTTING
Fig. D
Inspect MK-1280 Electric Saw
for general damage, loose con-
nections and hardware