MK Diamond MK-1280 Electric - Manual (Page 24)

24
Turn the ON/OFF switch to the OFF position and place the Fuel Valve in the
CLOSED position before performing the following.
BLADE WILL NOT CUT PROPERLY
WARNING
MOVABLE CUTTING TABLE DOES NOT MOVE CORRECTLY
Fig. A
Check for Smoothness or
“Glazing”
Fig. B
Check for Proper Rotation
Fig. C
Ensure Blade Core not bent
Fig. D
Verify blade correct for material
being used
Fig. A
Check that the Guide Rails
are clean and clean if dirty
Fig. B
Check the Movable Cutting
Table Roller Wheels and
replace if necessary
MK-1280 ELECTRIC SAW TROUBLESHOOTING