MK Diamond MK-2000 Electric - Manual (Page 26)

26
CUTTING WITH THE CUTTING HEAD LOCKED DOWN
This method is preferred when cutting small objects.
CAUTION
(A)
Loosen the Cutting Head Locking
Handle. Lower the Cutting Head
until the Blade touches the protec-
tive Wooden Strip.
(B)
Lock the Cutting Head in the
“Down” position using the Locking
Handle. Turn clockwise to tighten.
(B)
Move the cutting table to position
the brick in front of the blade.
Slowly push piece into the blade
and continue pushing until the cut
is complete. Turn off machine.
MK-2000 ELECTRIC SAW OPERATION
Cut in smooth even strokes; do not force the saw to cut.