Mk-2000 electric saw maintenance – MK Diamond MK-2000 Electric User Manual
Page 33
Advertising
33
MK-2000 ELECTRIC SAW
MAINTENANCE
(A)
Check the belt for proper ten-
sion. Proper tension 1/8-inch
deflection.
(B)
Loosen the Motor Mounting Bolts
using a 1/2 inch wrench; if reten-
sioning only go to step F.
BELT INSPECTION
(C)
Loosen the Motor Adjustment
Strap using a 9/16-inch wrench.
(D)
Push the Motor forward to loosen
the belt. Remove the old Belt.
Install the new belt.
(E)
Verify the belt is seated in the
grooves of both pulleys.
(F)
Tighten the Motor Adjustment
Strap using a 9/16-inch wrench
to remove slack.
(G)
Install the Belt Guard.
Advertising
This manual is related to the following products: