MK Diamond MK-3000 Series - Manual (Page 15)

15
MK-3000 SERIES SAFETY LABELS
CONSOLE CONTROL DESCRIPTIONS
Fig. 4 MK-3000 Console Controls
A
B
C
D
F
O
H
I
J
K
L
N
M
G
E
Object Name Function
A Fuel Tank Fill Fill the fuel tank at this location.
B Choke Use when cold starting.
C Engine Throttle Controls engine speed.
D Oil Pressure Light Indicates low oil pressure when illuminated.
E Fuel Gauge Shows the level of fuel in the fuel tank.
F Keyed ON-OFF Start Use to start engine.
G T-Handle Knob Use to tighten operator grip handles.
H Depth Indicator Displays cutting depth.
I Engage Handle Engages Transmission.
J FNR Handle Used to Set Direction of Saw (Forward/Neu-
tral/Reverse).
K Water Inlet Hook-up for standard water hose.
L E-Stop Stops down engine in an emergency!
M Water Lever Controls water flow to Blade Guard.
N Engine Tachometer/Hour Meter Shows the engine RPM’s (running) and En-
gine Hours (stopped).
O Blade Raise & Lower Switch Increase & decrease the blade depth