MK Diamond MK-3000 Series - Manual (Page 19)

19
MK-3000 SERIES PRODUCT SPECIFICATIONS
BLADE SPEED
Fig. 5 Blade Guards
WARNING
Do not exceed blade shaft speed shown. Excessive blade speed could result in blade failure and seri-
ous personal injury.
GUARD SIzE
BLADE SHAFT
SPEED*
BLADE SPEED (FPM)
Size FPM
20”
1900 RPM
16”
18”
20”
8,000
9,000
10,000
26”
18”
20”
24”
9,000
10,000
11,900
30”
26”
28”
30”
13,000
14,000
14,900
NOTICE
As shown on the chart, blade guards accept more than one size blade.
BLADE GUARDS AND BLADE SIzES
BLADE GUARD
BLADE SIZE THAT CAN BE
USED WITH BLADE GUARD
20” Uses 16” up to 20”
26” Uses 18” up to 26”
30” Uses 26” up to 30”
*Blade Shaft Speed at full throttle engine setting at 3600 rpm.