MTS Model 494-05 Handset - Manual (Page 12)

MTS Model 494.05 Handset
Handset Setup Procedures
12
About Exclusive Control
You can control hydraulic pressure and actuator movement with the interface of
the Station Manager application. This is referred to as station control.
Some systems are equipped with a portable device (such as the handset) that has
an interface that also allows you to perform station control.
For safety reasons, the system limits station control to only one interface at a
time. That interface is said to have “exclusive control.”
You assign exclusive control to one interface or the other, giving that interface
exclusive control of hydraulics and actuator movement, while disabling those
functions in the other interface.
Exclusive control
functions
The interface that has exclusive control controls the following functions:
• Manual Command (for positioning the actuator)
• Interlock Reset/Override
• Program Run, Stop, and Hold
• Hydraulics Off
Note The Hydraulics Off and Program Stop functions are always functional,
regardless of which interface has exclusive control.