MTS Model 494-05 Handset - Manual (Page 7)

Overview
MTS Model 494.05 Handset 7
About Display Pages
The handset user interface groups control functions into display pages. Display
pages are functional only when the handset has “exclusive control” of the station.
The first two characters in the top line of the display indicate the display page
function: MC=manual command, AO=auto offset, and HC=hydraulic control.
*MC SN1 Channel 2
>Displ 130.5 mm
-Force 234 kN
To enter exclusive control:
Press (Exclusive Control).
To change display pages:
Press or to select
different display pages.
Display
Page
Function
HC = Hydraulic Control
Each HPU and HSM has a
Hydraulic Control (HC) page where
you can apply hydraulics.
*HC SN1 HSM1
T2=J28B
> Off
- Low
High
AO = Auto Offset
Auto offset sets the output of the
selected signal to zero without
regard to the physical position of
the actuator or specimen loading.
*AO SN1 Ch 1
-Displ 130.5 mm
Force 234 kN
MC = Manual Command
Press to turn on manual
thumbwheel control of the active
selection (>).
*MC SN1 Ch 2
>Displ 130.5
-Force 234 kN