MTS SWIFT 45 GLP Sensor - Manual (Page 26)

SWIFT ® 45 GLP Sensors 26
Specifications
Hardware Overview
Minimum Rim Size inch 17.5
Typical Lug Nut Bolt Circle Accommodated mm 165 to 225; 8x275
(8x275 pattern accepts 20mm Studs)
Output Connector Type BNC
Auto Shunt Calibration Internal Shunts
Notes:
• Based on loads at center of transducer.
• Each SWIFT 45 sensor will be calibrated on an MTS calibration machine. MTS provides complete
documentation of calibration values for each serial number SWIFT unit. Unique calibration values
are stored electronically and transferred to the transducer interface unit (TI box) shipped with each
SWIFT 45.
• Periodic recalibration services can be provided by MTS.
• Rim design is provided by MTS and tested to SAE J267 criteria.
• Proper rim design is essential for optimum performance.
• For applications involving non-listed wheel sizes, contact your MTS application engineer.
• Reference rim weights based on 19.5x6.75 truck rim with 5.5" offset, 10 hole 225mm bolt circle.
Single wheel configuration.