MTS SWIFT 45 GLP Sensor - Manual (Page 39)

Road and Track Vehicles
SWIFT ® 45 GLP Sensors Installation 39
5. Attach the transducer to the modified wheel rim using the fasteners provided
(see the previous table). Hand tighten the bolts.
If environmental conditions warrant, coat each fastener with Birchwood
Casey Sheath RB1 rust preventative (or equivalent).
Lubricate the threads and under the head of each fastener with Molykote g-n
paste.
Bolt Torque Sequence
6. Tighten the M12 mounting bolts.
A. Following the sequence shown in the previous figure, torque the eight
M12 bolts (A through H) to the value for the first increment shown in
the following table.
B. Repeat Step 6A for the second increment.
Modified
lug nuts
Transducer
Spindle
adapter
spacer
8 M12 rim
fasteners
A-H
8 M20 rim
fasteners
1-8
32 M12 hub
fasteners
1-32