MTS SWIFT 45 GLP Sensor - Manual (Page 44)

SWIFT ® 45 GLP Sensors 44
Road and Track Vehicles
Installation
G. Tighten the screws that attach the hinge joint to the slip ring assembly.
4. Attach the transducer output cable to the slip ring encoder connector and the
Slip Ring D-connector on the rear of the TI.
5. Secure the cable along its length so that ot will not become damaged during
data collection. (For example, tape it to the external mirror.)
Be sure to leave enough slack in the cable to allow for the full range of
suspension travel.