MTS SWIFT 45 GLP Sensor - Manual (Page 35)

Road and Track Vehicles
SWIFT ® 45 GLP Sensors Installation 35
Installation Components (Test Track–Duals)
Importance of bolts
Bolts provide exceptional clamp force at the transducer to rim/spindle interface.
• Bolts on the inner hub secure the hub adapter to the SWIFT sensor.
• Bolts on the outer ring secure the SWIFT sensor to the wheel rim (or road
simulator spindle adapter).
Note Make sure all bolts are in place and fully torqued during all tests. Correct
use of bolts reduces the safety hazard and ensures optimal transducer
performance.
Before you begin
Observe the following safety conditions while you are attaching the SWIFT
sensor and components to the vehicle.
Using strong cleaners or solvents can damage the RTV seal and may void
the warranty.
Pressure-washing the transducer or cleaning it with solvents can damage it
or degrade the silastic seal and may void the warranty.
Do not pressure-wash the transducer or clean it with solvents. Use only a soft
sponge or brush with non-metal bristles and a gentle detergent (such as dish
soap) to wash the transducer.
CAUTION