Transducer interface setup, Transducer interface setup 41, Transducer – MTS WIFT Mini Transducer Interface User Manual
Page 41: Interface setup
Advertising
SWIFT
®
Mini TI
Transducer Interface Setup
41
Transducer Interface Setup
Overview
Two different software configurations are used by the TI, depending on whether
you will be using the SWIFT sensor on the test track (typical for spinning
application) or in the laboratory (typical for non-spinning or fixed application).
Angular transformation is required on the test track only. If you are using the
same transducer and TI for data collection on the test track and simulation testing
in the laboratory, you must change the software configuration in the TI when you
change testing modes.
Contents
Advertising