MTS WIFT Mini Transducer Interface - Manual (Page 73)

SWIFT ® Mini TI Troubleshooting 73
Troubleshooting
This chapter covers basic set-up related troubleshooting tips. Please read this
section to investigate problems that you observe. In many cases, these problems
will be setup related and can be corrected as described in this section.
Important In the event that these troubleshooting tips indicate that there is a
component failure, or the correction tips do not correct the problem,
contact MTS.
The SWIFT sensor, TI electronics, and accessory components are not
intended to be disassembled, other than as outlined in this section.
Disassembling or tampering with these components may result in damage
to the sensor, loss of watertight seal, and voiding of the warranty.
Do not disassemble the SWIFT sensor, Transducer Interface (TI) electronics, and
accessory components.
CAUTION