Maintenance, Transducer interface, Maintenance 71 – MTS WIFT Mini Transducer Interface User Manual
Page 71: Transducer interface 71
Advertising
SWIFT
®
Mini TI
Maintenance
71
Maintenance
Scheduled maintenance is a set of routine procedures that allow you to extend the
operating life of the transducer interface electronics.
The information provided in this chapter is a recommendation only. The actual
time intervals will depend on the operating conditions at your facility.
Transducer Interface
The electronics for your transducer have no internal parts that can be serviced by
the user. The case is sealed against moisture. Breaking the seal by opening the
case can void any warranty.
Before making any cable connections to the TI box, inspect the area of the
connector for accumulated dirt.
If necessary, clean the connector areas with low pressure air or an electrical
connector cleaner.
Advertising