Multiquip P54K-K2B-K4B - Manual (Page 10)

P54 9
K/K2B/K4B
Specifications :
1.2 Noise and vibration specifications
The noise and vibration specifications listed below in accordance with the EC
Machine Directive in the draft (92/68/EEC) were determined under operating
conditions typical for the machinery in question with vibration over a specified travel
surface.
In operational application, deviating values may result depending on the prevailing
operating conditions.
Noise specification
The noise emission specification stipulated in accordance with Annex 1, Section 1.7.4.f of
the EC Machine Directive is as follows
- Sound pressure level at the operator position : L
pA
= 91.5 dB(A)
- Sound power level :
L
WA
= 106.7 dB(A)
These noise emission values were determined in accordance with ISO 6081 for the sound
pressure level (L
pA
) and ISO 3744, DIN 45635, for the sound power level (L
WA
).
Vibration specification
The vibration specifications stipulated in accordance with Annex 1, Section 2.2 / 3.6.3. a of
the EC Machine Directive are as follows :
Subject to modifications
Rammax P54