Multiquip P54K-K2B-K4B - Manual (Page 34)

32 P54
K/K2B/K4B
Maintenance :
8.4 Check the oil level in the engine
Remark :
Set the machine on an even, load-bearing surface in such a way that it is horizontal.
• Pull out the oil dip stick "ÖMS" and wipe off with a
lint-free cloth (Fig. 26).
• Insert the oil dip stick as far as it will go and pull out
again.
• The oil level must be between the two markings.
• If the oil level lies below the bottom marking, top up with
oil immediately.
For suitable oil types, see the Kubota V-1903 Manual!
_____________________________________________________________________________________
8.5 Checking the hydraulic oil level
Remark :
Set the machine on an even, load-bearing surface in such a way that it is horizontal
• Check the oil level in the oil viewing window "ÖSA" :
The oil must come up at least to the
middle of the viewing window ! (Fig. 27)
• If necessary, top up with hydraulic oil.
Recommended oil types :
Mobil HPL 46,
Texaco Rando HD-C.
Corresponding oil types from other manufacturers can also be used.
Remark :
If it is discovered during the daily oil level check that there is hydraulic oil missing,
check all units, pipelines and houses immediately for leaks and top up missing
hydraulic oil before starting work.
Fig. 26
Fig. 27
ÖMS
ЦSA