Multiquip P54K-K2B-K4B - Manual (Page 43)

P54 41
K/K2B/K4B
Troubleshooting table :
10.0 Troubleshooting table
Fault : Possible cause : Remedy :
Vibration does not work ! Pusher blade not in uppermost
position. - Move pusher blade to uppermost
position
Engine running, machine does not
move ! Insufficient hydraulic oil in the tank.
Pedal valve defective - Check hydraulic oil level
- Check the hydraulic system for
leaks
- Check the pedal valve function
Engine does not start up ! No contact for limit switch under
driver's seat. - Check seat setting
Page 27 Section 6.0