Multiquip P54K-K2B-K4B - Manual (Page 16)

14 P54
K/K2B/K4B
Safety remarks :
3.8 Starting the machine :
3.8.1 Before starting
- Familiarize yourself with the equipment, the operating and control elements and the functional
characteristics of the machine in the respective field of application.
- Use personal safety gear (safety helmet, safety shoes, ear protection etc.).
Before starting, check whether
• there are persons or impediments located next to or under the machine
• the machine is free of oily and flammable materials
• all handles, steps and platforms are free of grease, oil, fuels, dirt, snow and ice
• the machine demonstrates any obvious defects
• all protective gear is firmly in place
• brakes, steering and operating elements are working
• the driver's seat is correctly set
- Never start the machine if any instruments, pilot lamps or control organs are defective.
- Do not tie any loose objects onto the machine.
- When climbing onto the machine, only use the provided stairs, steps and handles.
Danger - In the case of machines with ROPS roof (rollover bar), safety
belts must always be worn !
3.8.2 Starting :
Only ever start up and operate the machine from the driver's seat.
For starting, all operating levers must be in the "Neutral position"
After starting, check all display and operating elements.
3.8.3 Jump starting with jump leads :
Note :
The machine is equipped with a 12-Volt system!
Connect the plus to the plus terminal and the minus to the minus terminal (earth cable). Connect the earth
cable last and disconnect first! Incorrect connection will result in serious damage to the machine's electrical
system.