Multiquip P54K-K2B-K4B - Manual (Page 18)

16 P54
K/K2B/K4B
Safety remarks :
3.9.5 Checking the effects of vibration :
During compaction work with vibration, check the effect on adjacent buildings and buried pipelines (gas, water,
sewage, electrical). If necessary, compaction work may have to be discontinued.
Never use vibration on hard substrates (concrete or frozen earth), as this will damage the bearings!
3.9.6 Parking the machine :
Wherever possible, park the machine on a firm, even surface.
Before leaving the machine :
• Straighten up the articulated joint in order to simplify mounting and
descending
• Switch off the engine and pull out the ignition key.
• Move the shift lever to neutral.
Parked machines which could represent an obstruction must be safeguarded by clearly identifiable measures.
Never jump off the machine, but use the provided handles, steps and stairs.
3.9.7 Parking on slopes and inclines :
Safeguard the machine against rolling away. To do this use metal chocks in front of and behind the facings.
3.9.8 Starting in enclosed areas :
Exhaust fumes are lethal !
When starting the engine in enclosed areas, ensure that sufficient ventilation is provided.
3.10 Refuelling :
• Never breathe in fuel fumes. • Only refuel when the engine is switched off.
• Never refuel in enclosed areas. • No naked flames, no smoking.
• Do not spill fuel, mop up any splashes of fuel, do not allow to seep into the ground.
• Mixtures of diesel fuel and petrol (never Super petrol) should only be combined in the tank itself. First
fill in the necessary quantity of petrol, then top up with diesel fuel. Petrol diesel fuel mixes are equally
inflammable as petrol.