NTi Audio Digirator DR2 - Manual (Page 17)

17
Getting Started
Connecting the Digirator
XLR-connection
Connect the Digirator to your digital audio device using an XLR
cable. Note that the locking pin of the XLR connector will then
be located on the lower side of the instrument!
1.
2.
RCA connection
Connect the Digirator to the digital input of the unit to be test-
ed using a good quality RCA cable. Please note that not all RCA
cables are suitable for digital audio use.
Optical connection
Connect the Digirator to the optical input of the unit to be test-
ed using an optical TOSLINK cable. The cover flap of the output
opens automatically with the insertion of the cable.