Operation, Switching digirator on and off, Navigation in the menu bar – NTi Audio Digirator DR2 User Manual

Page 18

Advertising
background image

Operation

18

4. Operation

Switching Digirator on and off

Switching the Digirator on

To switch the Digirator on, press the “On/Off” button. The dis-
play lighting is switched on.

Switching the Digirator off

To switch the Digirator off, press the “On/Off” button and hold
it down for one second.

Navigation in the menu bar

The menu bar is divided into three parts. On the left-hand side,
you can choose between the Generator, Transparency-Test, I/O
Delay (Latency) and System functions.

1. To do this, select the left side of the menu bar with the rotary

wheel and confirm with “Enter”.

A selection window opens.

2. Select the desired function with the rotary wheel.
3. Confirm the selection with “Enter”.

You have now selected the desired function.

In the middle section of the menu bar you may mute or invert
individual channels of the output signal. In the right-most menu
you can save and recall configurations (see “Configurations”).

Advertising