Buttons and operating elements, Overview – NTi Audio Digirator DR2 User Manual

Page 8

Advertising
background image

Overview

8

Buttons and operating elements

wave

sens

mute

freq

esc

level

1

2

3

4

5

6

7

8

9

1

esc

Terminates an entry and
jumps to the top menu level.

2

Rotary

wheel

Slow rotation:
Precise setting of the value.
Fast rotation:
Setting the value in larger steps.

3

Enter

Confirming a selection.

4

wave

Selection of the test signal.

5

freq

Setting the output frequency. Also directly
jumps to the „PARAM“ menu with the
„SWEEP“ and „CHIRP“ test signals; and to file
selection with „FILE”, „DOLBY” and „DTS”.

6

mute

When pressed, it illuminates to indicate you
have switched off (Muted) the output signal.
The button also lights up during the cycle
pauses of the „PNOISE” and „CHIRP” signal
waveforms.

7

On / Off

Switches the instrument Power off if held down
for one second. Also switches the back-lighting
on and off with a shorter press.

8

sens

Changes the sensitivity of the frequency and
level settings.

9

level

Setting the output level. You can set the output
signal unit to dBF or %.

The following signals have a fixed output level:
DTS, DOLBY, TRANSPAR, I/O DELAY.

Advertising