NTi Audio Digirator DR2 - Manual (Page 39)

39
Dolby / DTS Signals
The handling of Dolby and DTS files is identical to wave files,
described in the previous chapter.
1
2
The test signals in the directories are sorted by non-linear for-
mat type.
Select the multi-channel format
1. Select the desired signal format (DLBY or DTS)
2. Use the rotary wheel to select the group symbol
1 .
3. Confirm with Enter.
4. Select the desired format.
5. Confirm with Enter.

You have changed the multi-channel format.
Select the signal
1. Select the file symbol 2 with the rotary wheel.
2. Confirm with Enter.
3. Select the desired signal with the rotary wheel.
4. Confirm with Enter.

The selected test signal is immediately played back.
Sequence of test signals
The order sequence of the files is sorted first by file extension
(e.g. file.001) and secondarily by actual file name. This enables
maximum flexibility in grouping similar test signals together.