Linear pcm test signals – NTi Audio Digirator DR2 User Manual

Page 36

Advertising
background image

Linear PCM Test Signals

36

Selecting a wav-file

1. Use the rotary wheel to select the file symbol

2

.

2. Confirm with “Enter”.
3. Select the desired wav-file with the rotary wheel.
4. Confirm with “Enter”.

The wav-file will be played.

Loading your own wav-files

Wave files for the DR2 must conform to the following require-
ments:

•  48 kHz sampling frequency
•  Mono or Stereo
•  16 - 24 bit definition

If a wave file does not meet the
requirements, the playback stops
and the “mute” button lights up
continuously red.

To load WAV-files, you will need a computer
with the following minimum specifications:

• PC with Windows 98SE
• Macintosh computer with OSX
• Available USB port

1. Connect the DR2 to the computer via USB.

The DR2 appears on your computer as a removable data
storage medium.

2. Open the “WAVE” sub-folder on the removable medium

All the sub-folders in the “Wave” folder
now appear in the folder selection

1

. You

may add additional sub-folders to this folder
level as required.

Advertising