NTi Audio Digirator DR2 - Manual (Page 27)

27
Operation
4. Select a memory location with the rotary wheel and store
your configuration by confirming the selection with “En-
ter”.

You have now stored the current instrument settings as a
configuration.
Calling up configurations
1. Use the rotary wheel to select CONFIG in the menu bar.
2. Confirm with “Enter”.

The following menu is opened:
3. Select RECALL and confirm with “Enter”.
4. Select the desired configuration in the Selection menu and
confirm with “Enter”.

You have now loaded the desired configuration.
Transferring configurations to another device
You have the possibility of transferring stored configurations to
another device.
1. Connect your DR2 to a computer via USB.

A removable memory drive will be indicated on the
computer.
2. Select the CONFIG sub-folder.

You will see the stored configurations of your DR2.
3. Copy this data to your computer.
4. Connect another DR2 to the computer via USB.
5. Copy the previously copied data into the CONFIG sub-fold-
er by overwriting the data therein.

You have now transferred configurations from your DR2 to
another DR2.
In order to easily remember configurations
you may rename them.
For altering the file names, connect the
DR2 to a computer via USB and rename
the files in the CONFIG folder. Only the
first 10 configurations are shown in the
display.