Omnitron Systems Technology iConverter 2FXM User Manual - Manual (Page 22)

When the upload is complete, the 2FXM displays the update status and then automatically restarts with the
newly loaded firmware.
3.4.5.4 Updating the 2FXM Firmware via FTP
Using an FTP application, upload the new firmware into the FTP root directory of the 2FXM. When the
file transfer is complete, the 2FXM verifies the file and then automatically restarts with the newly loaded
firmware.
For detailed instructions on updating the management modules and other modules in the same chassis via
FTP, download the application note “iConverter Management: Updating Modules via FTP” available on
Omnitron’s web page:
http://www.omnitron-systems.com/downloads.php
See Setting 2FXM Passwords Section 3.4.1.4, on how to configure FTP.
Page 22