Omnitron Systems Technology FlexCenter 200 User Manual

Flexcenter

Advertising
background image

Omnitron Systems Technology, Inc.

1

27 Mauchly #201, Irvine, CA 92618 (949) 250-6510 Fax: (949) 250-6514

FlexCenter

200

Auto-Sensing

Dual Speed 10/100 and 100 Stackable

Ethernet Hubs

User Manual

12 Omnitron Systems Technology, Inc.

SPECIFICATIONS

„ Protocol:

IEEE 802.3, 10Base-T, 100Base-Tx, 100Base-Fx

„ Interface Connectors:

UTP:

(12/24) RJ45 pins 1-2, 3-6 active

Fiber Optic:

(1) SC or ST

„ Cable Types:

UTP, 10Base-T:

EIA/TIA 568, Category 3, 4, or 5

UTP, 100Base-Tx:

EIA/TIA 568, Category 5

Fiber, Multimode (MM):

50/125, 62.5/125, 100/140 um

Fiber, Single-Mode (SM):

9/125 um

„ Supported Distances:

UTP:

100 m / 328 ft.

MM, Extended:

2 km / 1.2 mi.

SM, Extended:

25 km / 15 mi.

SM, Long Haul (LH):

58 km / 35 mi.

„ Indicators:

Hub:

Power:

LED (1), Yellow (10/100) or Green (100), power applied

Activity 10:

LED(1), Green, activity detected

Collision 10:

LED (1), Yellow, collision detected

Activity 100:

LED(1), Green, activity detected

Collision 100:

LED (1), Yellow, collision detected

Link / Partition:

LED (12/24), Green, per port: device detected / port partitioned

Port Speed:

LED (12/24), Green, per port: 10 / 100 / Searching

100Fx and 10/100Tx Modules:

Data Received:

LED (1), Green, data received

Link / Speed:

LED (1), Green / Yellow, device detected and 10/100 speed

Duplex Mode:

LED (1), Green / Yellow, Full-Duplex / Half-Duplex

Collision:

LED (1), Yellow, collision detected

„ Switches:

Hub:

UTP Crossover:

Straight / Crossed

Stack Control:

Base / Stack

Port Access Control:

6/12 Switches, 2 per 4 ports: Auto-Sensing / 100Base-Tx / 10Base-T

100Fx Module:

Duplex Mode:

Full / Half-Duplex

10/100Tx Module:

UTP Crossover:

Straight / Crossed

Auto-Sensing Mode:

Auto-Sensing / Manual

Duplex Mode:

Full-Duplex / Half-Duplex

Speed Control:

100Base-Tx / 10Base-T

„ Dimensions / Weight:

W:19.0"xD:8.0"xH:1.75" / 7 lb.

„ Power:

110 / 230 VAC, 50 / 60 Hz

„ Temperature:

0 to 40 degrees C

Humidity:

0-90% (non-condensing)

TECHNICAL SUPPORT

For assitance in installing this product, contact Omnitron’s Technical Support Department:

Phone: (949) 250-6510, Fax: (949) 250-6514

Address:

Omnitron Systems Technology, Inc.
27 Mauchly, #201
Irvine, CA 92618, USA

Email:

[email protected]

URL:

www.omnitron-systems.com

Advertising